Set up the MyLab and Mastering integration - Blackboard Ultra

Updated 18 Apr 2024

  1. Add the MyLab and Mastering link if you don't see it.
  2. Pair your Blackboard course with a MyLab or Mastering course.
  3. Add assignment or course tool links.
  4. Get students started.
  5. Sync grades.

You have the Blackboard Ultra course view if you see Books & Tools in your course's left (base) navigation.

Screenshot of sample base navigation Screenshot of sample Ultra course view

Not sure which integration you're using? This topic covers the MyLab and Mastering integration (LTI 1.1). The link for this integration is usually named MyLab and Mastering. The link for the Access Pearson integration (LTI 1.3) is named Access Pearson. Check the Launch Type in Diagnostics or contact your LMS administrator if you're unsure which integration was set up for you. The Launch Type for the MyLab and Mastering integration is Standard integration LTI 1.1.

Step 1: Add the MyLab and Mastering link

If you don't see the link, add it to your Blackboard course.

  1. If your Blackboard course will belong to a course group (copied from a template or a coordinator course), set up the template before creating student-use copies.
  2. Open your Blackboard course.

    Screenshot of a sample course list

  3. If prompted, choose the Ultra course view. Your selection is permanent and can't be undone.
  4. Under Books & Tools, select View course & institution tools.

    Screenshot of the tools link

  5. Under Can't find what you need?, select Browse all course tools.

    Screenshot of the link for all tools

    Then choose MyLab & Mastering.

    Screenshot of the MyLab & Mastering icon

    If you don't see the tool you want, contact your system administrator. Provide the administration guide for the MyLab and Mastering integration.

  6. Choose or confirm you want to use the Ultra view.
  7. Agree to any authorization requests.

Next, pair your courses.

Return to top

Step 2: Link accounts and pair courses

To open MyLab and Mastering from your LMS course, link your accounts once. Then pair your courses and set up assignments in your MyLab or Mastering course.

Watch a video of instructions

Link your accounts

If you're a section instructor or teaching assistant, see Register as a section instructor or TA.

  1. Select the MyLab and Mastering or Access Pearson link. (Add the link if you don't see it.)
  2. Select Open Pearson.

    Screenshot of the Open Pearson button

    If the Pearson Home page isn't already open in another tab, return to your LMS course navigation and select the MyLab and Mastering or Access Pearson link again.

  3. Agree to any authorization requests.
  4. If prompted, select Get Started to link your accounts.

    Screenshot of the Pearson Home page for a validated instructor

    If prompted, select Authorize to automatically migrate your Pearson assignment links from LTI 1.1 to LTI 1.3. Without authorizing LTI 1.1, your links won't migrate and you'll get a Socket_RP_84 error message.

    Sample Canvas message:

    Canvas authorization message

    Sample D2L Brightspace message:

    D2L authorization message

    For Pearson Seamless, go to step 5 to link accounts.

  5. Enter the username and password from your existing Pearson instructor account and select Link accounts. If you don't have an account, select Create an account and follow the prompts. You can only link one LMS account to one Pearson account.

    Link your accounts page

  6. Select Continue.

    Link accounts confirmation

    If you're asked to choose your product, select MyLab | Mastering. (For Revel, eText, or Live Response, go to Revel and Pearson eText for your LMS Help.) Your selection is permanent and can't be undone.

    Choose your product options

  7. If prompted, select Get Started on the Pearson Home page to pair your courses.

    Screenshot of the Pearson Home page for a validated instructor

    Select Get Started and follow the prompts to enter details about your role. Wait for a confirmation email.

    Screenshot of the validation message

Tips

If you see a blank white page, you might need to temporarily disable the AdBlock browser extension. See your browser Help for instructions.

If you have a valid Pearson account and get the message, "Account Upgrade Needed," contact Pearson Support. Your account is active but needs a subscription to the MyLab and Mastering course.

If you get the message, "To create courses you need a MyLab and Mastering educator account," contact Pearson Support for assistance.

Screenshot of message saying you need an educator account

Next, pair your courses.

Pair your courses

Start from your LMS course to pair it with a new or copy of a MyLab or Mastering course. You can't pair MyLab or Mastering courses you created outside your LMS course such as from the MyLab and Mastering website. However, you can pair copies of these existing MyLab or Mastering courses.

  1. To create or copy a MyLab or Mastering course, choose an option. Depending on your setup, you'll see different options.

    • If available, search the catalog for new course materials.

      Your browser may have an ad blocking extension, such as AdBlock Plus or uBlock Origin. Temporarily disable the extension for this site. See your browser Help for instructions. Then open Pearson and resume pairing your courses.

    • Copy a previous course you’ve taught with. (Learn what's included in the copy.)

      You might be offered the option to copy a paired course. Select Yes, copy this course to copy the course and its assignment or course tool links.

      If you select Yes, copy this course, you can't rename the MyLab or Mastering course or change due dates for assignments from the Enter Course Details page that appears later (see steps 4 and 5 below). Instead, after you finish pairing your courses, go to https://mlm.pearson.com/ to edit the course name and dates. See My Courses Help for instructions. If you select No, create another course, use the same course ID as the original to copy the assignment or course tool links and avoid duplicate grades.

      Screenshot of the "Your course is a copy" page

    • Enter a course ID to copy another instructor's course. For a member section in a course group, enter the course ID of the MyLab coordinator course.
    • Select the course materials provided to you.

    Screenshot of the Create a Course page

    For Pearson Seamless, select the suggested course or enter a course ID to copy an existing course. You can't pair a new course or a course you created outside the LMS such as from the MyLab and Mastering website. However, you can make a copy.

    Select or copy a course page

  2. If you searched the catalog, select your course materials. Otherwise, skip to step 3.

    Screenshot of the Select Course Materials page

  3. If prompted for course details, choose a course type:

    • If you want students to enroll in the course, select Student-use Course.

    • If you don't intend students to enroll in the course, select Instructor-use only. For managing multiple sections for a MyLab course, consider using a MyLab coordinator course in a course group. For MyLab IT courses paired with your LMS, you must copy an existing coordinator course.

    Screenshot of the course details page

  4. Enter the course name and description. Use something specific for the name like your term and class section. This helps you quickly identify the course later.

  5. Select the course dates.

    • Students who try to register before the start date get a course2 error.

    • Students can no longer open the Pearson course on the course end date (Eastern Time, US). Set a date after the last re-take opportunity for the final exam.

  6. Select whether to allow other instructors to copy your course using your course ID. You can change this setting later.

    Screenshot of the Instructors can copy this course check box under Allow copy

  7. Select Create course. You'll see a confirmation message.

    Screenshot of confirmation with course details

  8. Wait for email confirmation your course is created. This might take up to 3 hours.
  9. Close the browser tab, and return to your LMS course

Next, set up assignments.

Set up assignments

  1. From your LMS course, select the MyLab and Mastering or Access Pearson link. Don't see the link?
  2. Select Open MyLab & Mastering.

    Screenshot of the Open MyLab & Mastering button

  3. Make sure assignments are set up in your MyLab or Mastering course. Assign due dates in your Mastering course. Manage due dates only from your MyLab or Mastering course, not your LMS course.

    To successfully sync grades and open assignments, make sure assignment names are fewer than 128 characters. Avoid UTF-8 or these characters \ / " * < > + = | , % ! &

  4. Return to your LMS course.

Open MyLab and Mastering or Pearson tools. Add links, including any assignment or tool links to your course. Select Submit.

Add MyLab & Mastering links

Choose the folder containing the links, and then select Submit.

Pearson Confirmation Page

Repeat these steps anytime to update links.

Next, add assignment or tool links or get students started.

Return to top

Step 3: Add assignment or course tool links

Optionally, you can add links that students use to open MyLab or Mastering assignments or course tools, including Grades, from your Blackboard course. Learn how assignment or tool links function.

Prerequisites: First pair your MyLab or Mastering and Blackboard courses and set up assignments in your MyLab or Mastering course.

  1. Under Books & Tools, select View course & institution tools.

    Screenshot of the tools link

  2. Under Tools in this course, select the Pearson icon.

    Screenshot of the Pearson icon

  3. Select one or more links.

    Screenshot of sample page to add assignment links

  4. Select Submit.

    Screenshot of the Submit button

  5. Confirm the links you want to add.

    Screenshot of sample confirmation

  6. Select Submit.

    Screenshot of the Submit button

    You and your students can open the links from the content area. For MyLab courses, select Open Pearson to open a link in a new browser tab or window.

    Screenshot of a sample content area

Next, get students started.

Return to top

Step 4: Get students started

After you pair your LMS course with a MyLab or Mastering course, it’s simple for your students to open MyLab and Mastering. They need to link their LMS and Pearson accounts. They might be prompted for a username and password or to create an account. Depending on the course setup, we might automatically create a new account for them if it's their first time opening a Pearson product from your LMS. The username is the institution email address. We recommend students create the optional password to use the account to access other Pearson products, including mobile apps. Students can create the password later on from Forgot username or password or by selecting the link in their account confirmation email.

Depending on the course setup, they might need to purchase access. Options include pre-purchased access code, credit card, or PayPal. Temporary access without payment is available for a limited time for some courses but isn't supported for Access Pearson Codeless integrations.

Barnes & Noble, Follett Willo, RedShelf, or VitalSource: If a student is incorrectly prompted to purchase access, remove the Pearson integration settings.

For the second half of a multi-semester course, students might be prompted to link their LMS and Pearson accounts the first time they access the MyLab or Mastering course. Students must use the same Pearson username and password as the first part of the course. Otherwise, they might be prompted for payment again.

You don't need to give students course IDs or invite links. Communicate your course activity expectations and grade weighting with students. Let them know what's required for your course, including purchase options. Also, like instructors, students can download diagnostics to provide to Pearson support.

To access the student view of the MyLab or Mastering course as an instructor, remove the LMS Student View filter, and then select a student assignment, course tool, or eText link. If you select the Access Pearson link from the Student View, you’ll get error code SOCKET_LS_T_03.

Student resources

Share registration instructions and other resources with your students early, so they can immediately engage with course materials. We suggest copying and pasting these URLs into an email to students before classes start or your syllabus. Another option is to add these URLs as web links in a getting started section of your Blackboard course. See Blackboard Help for how to add links.

Return to top

Step 5: Sync grades

Sync grades one-way from your MyLab or Mastering course to your Blackboard course. Learn how grade sync works.

Prepare for grade sync in your MyLab or Mastering course

  1. Access the Pearson Home page and select Open Pearson.
  2. Select Open MyLab & Mastering.
  3. In your MyLab and Mastering course, turn on any grade settings and create assignments that meet the guidelines below. If needed, set availability/due dates and choose grade sync settings.

    Guidelines: To avoid problems opening MyLab and Mastering courses and syncing grades, make sure names, including course and assignment names, and settings don't have UTF-8 and these special characters: \ / " * < > + = | , % ! &

    Depending on your MyLab and Mastering platform, there are different ways to prepare for grade sync.

    See Mastering Help for grade sync considerations.

    See MyLab Help for how to set up grade sync from your MyLab course and choose how to sync scores.

    See MyLab Help for how to set up grade sync from your MyLab course and choose how to sync scores.

Next, return to your LMS course to set up grade sync.

Set up grade sync from your Blackboard course

Prerequisite: To avoid problems opening your MyLab or Mastering course and syncing grades, make sure names and settings in your Blackboard course don't have UTF-8 and these special characters: \ / " * < > + = | , % ! &

You manually sync (refresh) grades. Automatic grade sync isn't available.

  1. From your Blackboard course, select View course & institution tools under Books & Tools. Then select Expand icon. Need details?
  2. Select Pearson Grade Refresh Settings.

    Screenshot of the settings link

  3. Make sure Enabled is selected.

    Screenshot of the grade refresh status options

    To turn grade sync off, return here and select Disabled.

  4. Select whether to sync all or specific items. (Regardless of your selection, both options are available when you manually sync grades.)

    Screenshot of the grade refresh method options

  5. Choose your remaining settings and Submit.

    Submit button

  6. Select View course & institution tools under Books & Tools. Then select Expand icon.
  7. Select Pearson Grade Refresh to manually sync grades or clean up gradebook discrepancies.

    Screenshot of the grade refresh link.

  8. Select one or Blackboard assignments with grades you want to sync.

    Screenshot of items to sync

  9. Choose your remaining settings and Submit.

    Screenshot of the Submit button

See also: Get diagnostics

Return to top

Updated 18 Apr 2024