Set up Access Pearson - Schoology

  1. If your course will belong to a course group, set up the template first.

  2. From your Schoology course, select the Access Pearson link in the left navigation. If you don't see the link, contact your Schoology administrator.

  3. Select Open Pearson.
  4. If prompted, select Get Started. Then follow the prompts to link your accounts and pair your LMS course with new or suggested materials, if available, or an existing MyLab or Mastering course.
  5. Open your MyLab or Mastering course to turn on any grade settings and create assignments.
  6. From the Pearson Home page, select Grade Sync. Then select whether to sync grades automatically and choose any specific assignments to sync.
  7. Select Sync Grades Now to create assignment links and to initially populate the Schoology gradebook.
  1. Check for the Access Pearson link.
  2. Pair your Schoology course with a MyLab or Mastering course.
  3. Add assignment, course tool, or eText links.
  4. Get students started.
  5. Sync grades.

Not sure which integration you're using? This topic covers the Access Pearson integration (LTI 1.3). The link for this integration is usually named Access Pearson. Check the Launch Type in Diagnostics or contact your Schoology administrator if you're unsure which integration was set up for you. The Launch Type for the Access Pearson integration is Standard integration LTI 1.3.

Important grade sync issue: Don't use the Create Course tool in Schoology to create multiple linked sections. If you do so, MyLab or Mastering assignments only appear in the Schoology gradebook for Section 1. Grades won't sync for students enrolled in sections other than Section 1. Instead, create a Schoology course and pair it with a MyLab or Mastering course. Then copy the Schoology course to create sections. Select Access Pearson from each section to pair a copy of the existing MyLab or Mastering course.

Step 1: Check for the Access Pearson link

Open your Schoology course to check for and select the Access Pearson link in the left navigation. Contact your Schoology administrator to add the link if you don't see it.

Screenshot of th Pearson link

Next, pair your courses.

Return to top

Step 2: Link accounts and pair courses

To open MyLab and Mastering from your LMS course, link your accounts once. Then pair your courses and set up assignments in your MyLab or Mastering course.

Watch how to link accounts and pair courses (1:48)

Link your accounts

If you're a section instructor or teaching assistant, see Register as a section instructor or TA.

  1. Select the MyLab and Mastering or Access Pearson link. (Add the link if you don't see it.)
  2. Select Open Pearson.

    Screenshot of the Open Pearson button

    If the Pearson Home page isn't already open in another tab, return to your LMS course navigation and select the MyLab and Mastering or Access Pearson link again.

  3. If you're asked to choose your product, select MyLab | Mastering. (For Revel, eText, or Live Response, go to Revel and Pearson eText for your LMS Help.) Your selection is permanent and can't be undone.

    Choose your product options

  4. Agree to any authorization requests and accept cookies.
  5. If prompted, select Get Started to link your accounts.

    Screenshot of the Pearson Home page for a validated instructor

    If prompted, select Authorize to automatically migrate your Pearson assignment links from LTI 1.1 to LTI 1.3. Without authorizing LTI 1.1, your links won't migrate and you'll get a Socket_RP_84 error message.

    Sample Canvas message:

    Canvas authorization message

    Sample D2L Brightspace message:

    D2L authorization message

    For Pearson Seamless, go to step 6 to link accounts.

  6. Enter the username and password from your existing Pearson instructor account and select Link accounts. If you don't have an account, select Create an account and follow the prompts. You can only link one LMS account to one Pearson account.

    Link your accounts page

  7. Select Continue.

    Link accounts confirmation

  8. If prompted, select Get Started on the Pearson Home page to pair your courses.

    Screenshot of the Pearson Home page for a validated instructor

    Select Get Started and follow the prompts to enter details about your role. Wait for a confirmation email.

    Screenshot of the validation message

Tips

If you see a blank white page, you might need to temporarily disable the AdBlock browser extension. See your browser Help for instructions.

If you have a valid Pearson account and get the message, "Account Upgrade Needed," contact Pearson Support. Your account is active but needs a subscription to the MyLab and Mastering course.

If you get the message, "To create courses you need a MyLab and Mastering educator account," contact Pearson Support for assistance.

Screenshot of message saying you need an educator account

Next, pair your courses.

Pair your courses

Start from your LMS course to pair it with a new or copy of a MyLab or Mastering course. You can't pair MyLab or Mastering courses you created outside your LMS course such as from the MyLab and Mastering website. However, you can pair copies of these existing MyLab or Mastering courses.

Most assignment and course tool links automatically migrate to LTI 1.3. To ensure this works when pairing a new edition of a Mastering platform update course, copy your previous paired course. Go to Diagnostics for your previous course and note the course ID. When you pair the new LMS course, enter the course ID you noted under Copy an existing course.

Links to eText sections, Scheduled Reading, and Adaptive Followups in a new edition aren't included in the course copy or the link migration. You'll need to manually add these links to your LMS course.

  1. To create or copy a MyLab or Mastering course, choose an option. Depending on your setup, you'll see different options.
    • If available, search the catalog for new course materials.

      Your browser may have an ad blocking extension, such as AdBlock Plus or uBlock Origin. Temporarily disable the extension for this site. See your browser Help for instructions. Then open Pearson and resume pairing your courses.

    • Copy a previous course you’ve taught with. (Learn what's included in the copy.)

      You might be offered the option to copy a paired course. Select Yes, copy this course to copy the course and its assignment or course tool links.

      If you select Yes, copy this course, you can't rename the MyLab or Mastering course or change due dates for assignments from the Enter Course Details page that appears later (see steps 4 and 5 below). Instead, after you finish pairing your courses, go to https://mlm.pearson.com/ to edit the course name and dates. See My Courses Help for instructions. If you select No, create another course, use the same course ID as the original to copy the assignment or course tool links and avoid duplicate grades.

      Mastering platform update: If you're transitioning to Access Pearson and copying a new edition with the Mastering platform update, select No, create another course. To ensure assignment and course tool links automatically migrate to LTI 1.3, go to Diagnostics for your previous course and copy the course ID. When you pair your new course, enter the course ID under Copy an existing course.

       

      Screenshot of the "Your course is a copy" page

    • Enter a course ID to copy another instructor's course. For a member section in a course group, enter the course ID of the MyLab coordinator course.
    • Select the course materials provided to you.

    Screenshot of the Create a Course page

    For Pearson Seamless, select the suggested course or enter a course ID to copy an existing course. You can't pair a new course or a course you created outside the LMS such as from the MyLab and Mastering website. However, you can make a copy.

    Select or copy a course page

  2. If you searched the catalog, select your course materials. Otherwise, skip to step 3.

    Screenshot of the Select Course Materials page

  3. If prompted for course details, choose a course type:

    • If you want students to enroll in the course, select Student-use Course.

    • If you don't intend students to enroll in the course, select Instructor-use only. For managing multiple sections for a MyLab course, consider using a MyLab coordinator course in a course group. For MyLab IT courses paired with your LMS, you must copy an existing coordinator course.

    Screenshot of the course details page

  4. Enter the course name and description. Use something specific for the name like your term and class section. This helps you quickly identify the course later.

  5. Select the course dates.

    • Students who try to register before the start date get a course2 error.

    • Students can no longer open the Pearson course on the course end date (Eastern Time, US). Set a date after the last re-take opportunity for the final exam.

  6. Select whether to allow other instructors to copy your course using your course ID. You can change this setting later.

    Screenshot of the Instructors can copy this course check box under Allow copy

  7. Select Create course. You'll see a confirmation message.

    Screenshot of confirmation with course details

  8. Wait for email confirmation your course is created. This might take up to 3 hours.
  9. Close the browser tab, and return to your LMS course

Next, set up assignments.

Set up assignments

  1. From your LMS course, select the MyLab and Mastering or Access Pearson link. Don't see the link?
  2. Select Open MyLab & Mastering.

    Screenshot of the Open MyLab & Mastering button

  3. Make sure assignments are set up in your MyLab or Mastering course. Assign due dates in your Mastering course. Manage due dates only from your MyLab or Mastering course, not your LMS course.

    To successfully sync grades and open assignments, make sure assignment names are fewer than 128 characters. Avoid UTF-8 or these characters \ / " * < > + = | , % ! &

    Using the Mastering platform update? Learn about differences in how assignments are handled.

  4. Return to your LMS course.

Next, add assignment or tool links or get students started.

Return to top

Step 3: Add assignment, course tool, or eText links

Optionally, you can add links that students use to open MyLab or Mastering assignments, course tools, such as Grades, or eText (also called eTextbook) from your Schoology course. These links only work with the Access Pearson integration for Schoology. Learn how assignment, course tool, and eText links function.

Enable grading: If you edit an assignment, course tool, or eText link from Materials in the left navigation and then select the Enable Grading check box, make sure those items are set as ungraded in the gradebook's bulk edit view before you sync grades.

Prerequisites: First pair your MyLab or Mastering and Schoology courses and set up assignments in your MyLab or Mastering course.

Watch how to add assignment links

  1. From your Schoology course, select Materials in the left navigation.

    Screenshot of the Materials option

  2. Select the Add Materials tab and then Access Pearson.

    Screenshot of Add Materials

  3. From the Add links from list, choose whether to see assignments, course tools, or eText. Then scroll to see all the links or search for a specific link. Choose a column heading to sort.

    Screenshot of the Add links page

  4. Select one or more links and repeat for any option in Add links from.

    Select a Chapter to see its associated links.

    Sample eText links

  5. Select Add links at the bottom of the page.

    You'll see the links you just added. You can drag and drop your assignments into an existing folder or create a new one by selecting Add Folder from the Add Materials menu. Select a link and then Open Pearson to open the link in a new browser tab or window.

    Screenshot of sample assignment links in a folder

Next, get students started.

Return to top

Step 4: Get students started

After you pair your LMS course with a MyLab or Mastering course, it’s simple for your students to open MyLab and Mastering. They need to link their LMS and Pearson accounts. They might be prompted for a username and password or to create an account. Depending on the course setup, we might automatically create a new account for them if it's their first time opening a Pearson product from your LMS. The username is the institution email address. We recommend students create the optional password to use the account to access other Pearson products, including mobile apps. Students can create the password later on from Forgot username or password or by selecting the link in their account confirmation email.

Depending on the course setup, students might need to purchase access. Options include pre-purchased access code or credit card. If available, they can also use Apple Pay or PayPal. Temporary access without payment for a limited time is an option for some courses but isn't supported for Access Pearson Codeless integrations.

Barnes & Noble, Follett Willo, RedShelf, or VitalSource: If a student is incorrectly prompted to purchase access, remove the Pearson integration settings.

RedShelf: To opt in to getting access to MyLab and Mastering through the RedShelf bookstore, students select the Course Materials link for RedShelf and then Access Courseware. To opt out and get access through Pearson, students select Access Pearson. Afterward, they must open MyLab and Mastering by selecting the Course Materials link to RedShelf and then Access Courseware.

RedShelf opt note

For the second half of a multi-semester course, students might be prompted to link their LMS and Pearson accounts the first time they access the MyLab or Mastering course. Students must use the same Pearson username and password as the first part of the course. Otherwise, they might be prompted for payment again.

You don't need to give students course IDs or invite links. Communicate your course activity expectations and grade weighting with students. Let them know what's required for your course, including purchase options. Also, like instructors, students can download diagnostics to provide to Pearson support.

To access the student view of the MyLab or Mastering course as an instructor, remove the LMS Student View filter, and then select a student assignment, course tool, or eText link. If you select the Access Pearson link from the Student View, you’ll get error code SOCKET_LS_T_03.

Student resources

Share registration instructions and other resources with your students early so they can immediately engage with course materials. We suggest copying and pasting these URLs into an email to students before classes start or your syllabus. Another option is to add these URLs as links in a getting started section of your Schoology course. See Schoology Help for how to add links.

Return to top

Step 5: Sync grades

Sync grades one-way from your MyLab or Mastering course to your Schoology course. Learn how grade sync works.

Watch how to sync grades (1:01)

Prepare for grade sync in your MyLab or Mastering course

  1. Access the Pearson Home page and select Open Pearson.
  2. Select Open MyLab & Mastering.
  3. In your MyLab and Mastering course, turn on any grade settings and create assignments that meet the guidelines below. If needed, set availability/due dates and choose grade sync settings.

    Guidelines: To avoid problems opening MyLab and Mastering courses and syncing grades, make sure names, including course and assignment names, and settings don't have UTF-8 and these special characters: \ / " * < > + = | , % ! &

    Depending on your MyLab and Mastering platform, there are different ways to prepare for grade sync.

    See Mastering Help for grade sync considerations.

    Using the Mastering platform update? Learn about differences in how assignments and grade settings are handled.

    See MyLab Help for how to set up grade sync from your MyLab course and choose how to sync scores.

    See MyLab Help for how to set up grade sync from your MyLab course and choose how to sync scores.

Next, return to your LMS course to set up grade sync.

Set up grade sync from your Schoology course

Prerequisite: To avoid problems opening your MyLab or Mastering course and syncing grades, make sure names and settings in your Schoology course don't have UTF-8 and these special characters: \ / " * < > + = | , % ! &

Enable Grading: If you selected Enable Grading for an assignment, course tool, or eText link, you'll see next to the item in the gradebook's bulk edit view. To display these items properly in the gradebook, make sure the Category for those items is set to Ungraded before you sync grades.

  1. Select the Access Pearson link. Don't see the link?
  2. Select Open Pearson.
  3. Select Grade Sync.

    Screenshot of the Pearson Home page

  4. To automatically sync grades as they become available, select On for Automatic Grade Sync. This doesn't sync past grades. (If Off is selected, MyLab and Mastering grades only sync to Schoology when you select Sync Grades Now.)

    Screenshot of the Automatic Grade Sync options

    Regardless of whether automatic grade sync is turned on, use Sync Grades Now anytime to manually sync all existing grades, including grades available before you turned auto sync on.

    Sync Grades Now button

  5. Make selections in the Items to Sync list. You might need to wait up to 15 minutes after you set up grade sync to see these items.

    Screenshot of the Items to Sync list

  6. Select Sync Grades Now to create links for any assignments and to initially populate the Schoology gradebook.

    Sync Grades Now button

  7. For students to see grades, you must assign a category to each assignment.

    You can use existing categories or create a new one by selecting Grade Setup from the left navigation. Then select + Add.

    Screenshot of the Categories page

    Add the details for your category and select Create.

    Screenshot of the Add Grading Category window

  8. Select Gradebook from the left navigation. Then select Bulk Edit from theScreenshot of the Options menu iconOptions menu.

    Screenshot of the Bulk Edit option

  9. Select a category for each assignment and Save Changes.

    Remember to set any items with Enable Grading to Ungraded.

    Screenshot of the Bulk Edit page

See also: Get diagnostics

Return to top

Updated 08 Oct 2024